Embossed belt buckle type and damage solution

15-10-2019

    A good belt can reflect a person's taste and increase charm. So, do you know the type of Embossed belt buckle? What if the Embossed belt buckle is broken? Let's take a look at the Embossed belt buckle type and damage solution, I hope to help everyone.


  Embossed belt buckle type introduction


  At present, the types of Embossed belt buckles commonly used are divided into buckles (smooth buckles), automatic buckles and pin buckles according to different fastening methods.


  Buckle


  The key feature of the buckle is that there is a hook with a ball in the middle of the front of the Embossed belt buckle. When the belt is wrapped around one year, it is hooked into the round hole at the tail of the belt, so that it is stuck. This kind of hooked buckle has many shapes and different structures, but we call this hooked Embossed belt buckle as a buckle, which is a smooth buckle.


  Automatic buckle


  This is the most common type of buckle, with a small round magnet at the bottom and a piece of iron fascia combined to create elasticity. Pull the side of the drive rod to separate the jaw and the magnet. At this time, the belt can pass through the middle, adjust to the proper position and then release, then the belt is magnetically stuck. If you open it again, the body can be pulled out freely. When the drive rod is released, the belt will automatically get stuck, so the buckle type is called the automatic buckle.


  Buckle


  There is a flat needle in the middle of the buckle and a row of holes at the end of the belt. When the belt is wrapped around one year, the needle is inserted into the hole and it is stuck. The structure of the pin buckle is relatively simple and simple to use, and it is one of the most commonly used buckle types.

       

Embossed belt buckle

  

  Embossed belt buckle damage solution


  This is because the buckle of the Embossed belt buckle becomes loose due to frequent wear and tear, so there is no strength. So change the belt:


  1. Change the belt body, buy a semi-finished product of the belt, and put the belt head on the belt.


  2. replace the belt head, go to the repair shop to buy a longer belt head, put it on, you can bring the buckle teeth.


  3. Let the maintenance personnel buckle the card slot a little deeper.


  4. Buy a new belt.


  The above is about the type of Embossed belt buckle and the solution to the damage. I hope everyone can understand the Embossed belt buckle type and the damage solution.


Dapatkan harga terkini? Kami akan bertindak balas secepat mungkin (dalam masa 12 jam)

Dasar privasi